Please help test the very latest daily build images. Report bugs on webc-users or on github.

Virtualbox >= 4.2

NOTE: You need to enable PAE and if your VM fails to boot try give it more RAM

NOTE: If Webconverger fails to boot, make sure your BIOS has Virtualization options turned on as noted in Webconverger 35 release.

• Archlinux Virtualbox setup guide

Setting a bridged network interface is straightforward, you just need to ensure:

sudo modprobe -a vboxnetadp vboxnetflt

Testing branches from the install version

With fetch-revision= from upgrade we can test experimental branches, before they are merged to master.

Here is a video explaining how to get an installed Webconverger to switch branches for testing.

Testing network failure

Network use cases:

1. Boot with network - should work normally
2. Boot with network and later become disconnected - should retry
3. Boot without network - should show no-net.png
4. Boot without network and become connected - should come back online
5. Boot connected to router, but router has no internet connectivity - should show no-net.png
6. Boot connected to router, with router regaining internet connectivity after 2 minutes

Think of cases where network comes online but configuration is failed to be fetched.

"debug mode" will bypass no-net.png

Important elements to test before delivery

• SSL https://config.webconverger.com/
• Test DDG search engine works

wireless can only be realistically tested on physical hardware (i.e. not under virtualisation)

YouTube

• Adobe flash test http://www.adobe.com/software/flash/about/
• Sound
• PDF